LMTM Publications
2024
Monitoring of laser-induced fast recrystallization in SS-316L through synchrotron X-ray diffraction
Materials & Design. 2024-01-09. Vol. 238, p. 112628. DOI : 10.1016/j.matdes.2023.112628.2023
Site-specifically tailored microstructures with enhanced strength and hardening through laser powder bed fusion
Materials & Design. 2023-12-20. Vol. 237, p. 112539. DOI : 10.1016/j.matdes.2023.112539.Harmonizing sound and light: X-ray imaging unveils acoustic signatures of stochastic inter-regime instabilities during laser melting
Nature Communications. 2023-12-05. Vol. 14, num. 1, p. 8008. DOI : 10.1038/s41467-023-43371-3.Healing of keyhole porosity by means of defocused laser beam remelting: Operando observation by X-ray imaging and acoustic emission-based detection
Additive Manufacturing. 2023-12-01. Vol. 79, p. 103880. DOI : 10.1016/j.addma.2023.103880.EBSD study of variant reorientation, texture, and twin formation in a martensitic NiTi alloy deformed in compression
Acta Materialia. 2023-11-29. Vol. 264, p. 119553. DOI : 10.1016/j.actamat.2023.119553.In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V
Additive Manufacturing. 2023-11-23. Vol. 78, p. 103882. DOI : 10.1016/j.addma.2023.103882.Corrosion behavior and tribological-microstructural characterization of Al/ZrO2-Gr hybrid composite fabricated via Friction Stir Processing
Journal Of Alloys And Compounds. 2023-10-15. Vol. 960, p. 170770. DOI : 10.1016/j.jallcom.2023.170770.Superplastic behavior of a fine-grained Mg-Gd-Y-Ag alloy processed by equal channel angular pressing
Journal Of Magnesium And Alloys. 2023-10-01. Vol. 11, num. 10, p. 3815-3828. DOI : 10.1016/j.jma.2023.07.017.Simultaneous strength and ductility enhancement of wire-arc directed energy deposited Al-Cu alloy by interlayer laser shock peening
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2023-09-24. Vol. 887, p. 145699. DOI : 10.1016/j.msea.2023.145699.Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy
Journal Of Magnesium And Alloys. 2023-05-01. Vol. 11, num. 5, p. 1769-1790. DOI : 10.1016/j.jma.2023.05.006.Wear behaviour of novel copper alloy as an alternative to copper-beryllium
Wear. 2023-04-23. Vol. 524, p. 204817. DOI : 10.1016/j.wear.2023.204817.An investigation on the fatigue behavior of additively manufactured laser shock peened AlSi7Mg alloy surfaces
Materials Characterization. 2023-04-14. Vol. 200, p. 112907. DOI : 10.1016/j.matchar.2023.112907.Interplay between dislocation glide and omega precipitation in a Ti-15Mo alloy investigated by TEM
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2023-04-12. Vol. 870, p. 144855. DOI : 10.1016/j.msea.2023.144855.Acoustic emission for the prediction of processing regimes in Laser Powder Bed Fusion, and the generation of processing maps
Additive Manufacturing. 2023-03-15. Vol. 67, p. 103484. DOI : 10.1016/j.addma.2023.103484.Temperature dependent critical stress for {1012} twinning in magnesium micropillars at cryogenic temperatures
Scripta Materialia. 2023-03-15. Vol. 226, p. 115195. DOI : 10.1016/j.scriptamat.2022.115195.Compressive properties of a severely deformed fine-grained Mg-6Gd-3Y alloy
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2023-03-14. Vol. 868, p. 144769. DOI : 10.1016/j.msea.2023.144769.Laser powder-bed fusion of a high entropy alloy with outstanding intrinsic mechanical properties
Journal Of Alloys And Compounds. 2023-02-22. Vol. 945, p. 169209. DOI : 10.1016/j.jallcom.2023.169209.Response of magnesium microcrystals to c-axis compression and contraction loadings at low and high strain rates
Acta Materialia. 2023-02-18. Vol. 248, p. 118762. DOI : 10.1016/j.actamat.2023.118762.Stability of untransformed ferrite in 10Cr ODS steel
Journal Of Nuclear Materials. 2023-02-01. Vol. 574, p. 154146. DOI : 10.1016/j.jnucmat.2022.154146.Deformation mechanisms of primary ?? precipitates in nickel-based superalloy
Scripta Materialia. 2023-02-01. Vol. 224, p. 115109. DOI : 10.1016/j.scriptamat.2022.115109.Micromechanical response of pure magnesium at different strain rate and temperature conditions: twin to slip and slip to twin transitions
Acta Materialia. 2023-01-15. Vol. 243, p. 118528. DOI : 10.1016/j.actamat.2022.118528.A hybrid Selective Laser Sintering based process for the additive manufacturing of architectured composites
Lausanne, EPFL, 2023.Towards Robust Monitoring of the Laser Powder Bed Fusion Process based on Acoustic Emission combined with Machine Learning Solutions
Lausanne, EPFL, 2023.2022
An investigation on reorientation and textural evolution in a martensitic NiTi rolled sheet using EBSD
International Journal Of Plasticity. 2022-12-01. Vol. 159, p. 103468. DOI : 10.1016/j.ijplas.2022.103468.Neutron Bragg edge imaging for strain characterization in powder bed additive manufacturing environments
Journal Of Materials Research And Technology-Jmr&T. 2022-11-01. Vol. 21, p. 4428-4438. DOI : 10.1016/j.jmrt.2022.11.047.Thermal Modelling and Experimental Validation in the Perspective of Tool Steel Laser Polishing
Applied Sciences-Basel. 2022-09-01. Vol. 12, num. 17, p. 8409. DOI : 10.3390/app12178409.The concept of axial weak twins
Acta Materialia. 2022-09-01. Vol. 236, p. 118128. DOI : 10.1016/j.actamat.2022.118128.Effect of chromium content on microstructural evolution of CoNiAlW superalloy
Applied Physics A-Materials Science & Processing. 2022-08-01. Vol. 128, num. 8, p. 719. DOI : 10.1007/s00339-022-05768-7.Nanotwinning-assisted recrystallization
Nature Materials. 2022-07-01. Vol. 21, num. 7, p. 738-739. DOI : 10.1038/s41563-022-01284-4.Tailored deformation behavior of 304L stainless steel through control of the crystallographic texture with laser-powder bed fusion
Materials & Design. 2022-07-01. Vol. 219, p. 110789. DOI : 10.1016/j.matdes.2022.110789.Bragg edge tomography characterization of additively manufactured 316L steel
Physical Review Materials. 2022-05-02. Vol. 6, num. 5, p. 053602. DOI : 10.1103/PhysRevMaterials.6.053602.Evolution of deformation twinning mechanisms in magnesium from low to high strain rates
Materials & Design. 2022-05-01. Vol. 217, p. 110646. DOI : 10.1016/j.matdes.2022.110646.Hot rocks: Constraining the thermal conditions of the Mistastin Lake impact melt deposits using zircon grain microstructures
Earth And Planetary Science Letters. 2022-04-15. Vol. 584, p. 117523. DOI : 10.1016/j.epsl.2022.117523.Persistence of variant selection in red gold alloys
Journal Of Alloys And Compounds. 2022-04-05. Vol. 899, p. 163364. DOI : 10.1016/j.jallcom.2021.163364.Understanding variant selection and texture in additively manufactured red-gold alloys
Scripta Materialia. 2022-04-01. Vol. 211, p. 114490. DOI : 10.1016/j.scriptamat.2021.114490.Deformation twinning mechanism in magnesium at the microscale: strain rate, temperature and orientation effects
Lausanne, EPFL, 2022.Design, prototyping, and thermo-mechanical modelling of a neutron spallation target impacted by high-energy proton-beam pulses in the n_TOF facility at CERN
Lausanne, EPFL, 2022.Micro-addition of Fe in highly alloyed Cu-Ti alloys to improve both formability and strength
Materials & Design. 2022-01-01. Vol. 213, p. 110340. DOI : 10.1016/j.matdes.2021.110340.A new method for lattice reduction using directional and hyperplanar shearing
Acta Crystallographica A-Foundation And Advances. 2022-01-01. Vol. 78, p. 1-9. DOI : 10.1107/S2053273321011037.2021
Tensile and Impact Toughness Properties of a Zr-Based Bulk Metallic Glass Fabricated via Laser Powder-Bed Fusion
Materials. 2021-10-01. Vol. 14, num. 19, p. 5627. DOI : 10.3390/ma14195627.Design of the third-generation lead-based neutron spallation target for the neutron time-of-flight facility at CERN
Physical Review Accelerators And Beams. 2021-09-07. Vol. 24, num. 9, p. 093001. DOI : 10.1103/PhysRevAccelBeams.24.093001.A fast algorithm to find reduced hyperplane unit cells and solve N-dimensional Bezout’s identities
Acta Crystallographica A-Foundation And Advances. 2021-09-01. Vol. 77, p. 453-459. DOI : 10.1107/S2053273321006835.Microstructural Evolution Study of Fe-Mn-Al-C Steels Through Variable Thermomechanical Treatments
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2021-08-26. Vol. 42, p. 4785–4799. DOI : 10.1007/s11661-021-06424-0.Influence of Joule Effect Heating on Recrystallization Phenomena in Inconel 718
Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science. 2021-08-10. Vol. 52, p. 4572–4596. DOI : 10.1007/s11661-021-06411-5.Additive Manufacturing of Bulk Metallic Glasses-Process, Challenges and Properties: A Review
Metals. 2021-08-01. Vol. 11, num. 8, p. 1279. DOI : 10.3390/met11081279.A parametric neutron Bragg edge imaging study of additively manufactured samples treated by laser shock peening
Scientific Reports. 2021-07-21. Vol. 11, num. 1, p. 14919. DOI : 10.1038/s41598-021-94455-3.Fatigue Performance of an Additively Manufactured Zr-Based Bulk Metallic Glass and the Effect of Post-Processing
Metals. 2021-07-01. Vol. 11, num. 7, p. 1064. DOI : 10.3390/met11071064.Additive manufacturing of a precious bulk metallic glass
Applied Materials Today. 2021-06-06. Vol. 24, p. 101080. DOI : 10.1016/j.apmt.2021.101080.Characterization of untransformed ferrite in 10Cr and 12Cr ODS steels
Materialia. 2021-05-01. Vol. 16, p. 101066. DOI : 10.1016/j.mtla.2021.101066.Critical crystallization properties of an industrial-grade Zr-based metallic glass used in additive manufacturing
Scripta Materialia. 2021-03-17. Vol. 199, p. 113861. DOI : 10.1016/j.scriptamat.2021.113861.Microstructural evolution and superplastic behavior of a fine-grained Mg-Gd-Y-Ag alloy processed by simple shear extrusion
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2021-03-04. Vol. 806, p. 140803. DOI : 10.1016/j.msea.2021.140803.Nondestructive characterization of laser powder bed fusion parts with neutron Bragg edge imaging
Additive Manufacturing. 2021-03-01. Vol. 39, p. 101848. DOI : 10.1016/j.addma.2021.101848.Coupled segregation mechanisms of Sc, Zr and Mn at theta ‘ interfaces enhances the strength and thermal stability of Al-Cu alloys
Acta Materialia. 2021-03-01. Vol. 206, p. 116634. DOI : 10.1016/j.actamat.2021.116634.Mapping Spatial Distribution of Pores in an Additively Manufactured Gold Alloy Using Neutron Microtomography
Applied Sciences. 2021-02-08. Vol. 11, num. 4, p. 1512. DOI : 10.3390/app11041512.Superplastic behavior of a severely deformed Mg-6Gd-3Y-0.5Ag alloy
Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing. 2021-01-20. Vol. 802, p. 140616. DOI : 10.1016/j.msea.2020.140616.Understanding Thermomechanical Treatments Induced by Laser Powder Bed Fusion Process
Lausanne, EPFL, 2021.Laser powder-bed fusion of metallic alloys with enhanced microstructures and properties
Lausanne, EPFL, 2021.Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC
Materials Characterization. 2021-01-01. Vol. 171, p. 110815. DOI : 10.1016/j.matchar.2020.110815.{10(1)over-bar2} twinning mechanism during in situ micro-tensile loading of pure Mg: Role of basal slip and twin-twin interactions
Materials & Design. 2021-01-01. Vol. 197, p. 109206. DOI : 10.1016/j.matdes.2020.109206.Laser treatment systems and methods for in-situ laser shock peening (lsp) treatment of parts during production thereof by a selective laser sintering or melting (sls/slm) process, and additive manufacturing systems and methods implementing the same
US2022395906; EP4054779; WO2021090043.
2021.